Recent content by NateRD25

I can get a maintenance window. Do you have instruction on how to install the device pack?

Yea I saw that. I downloaded the device pack. Any steps on how to install the device pack?

I am having issues getting a Cisco 8831 setup. I have the "Cisco" display on the phone without any buttons. There should be an "app" button it doesn't get that far. There has to be something with a config file maybe? The phone auto-registers, but nothing happens on the display. I also see...

Ok so I got it to work but only when I have the whole pattern. For example, when I have 8xxx in for my translation it doesn't work, but if I have 8530 as my translation pattern it does.

Still having this issue.

We found our issue. There was a pair of wires going to a amp that were touching causing the hum, once maintenance ran a new pair the humming stopped.

That is what we are thinking because I have unplugged the TAMB unit and the humming is still albeit a little softer.

Unplugging the FXO port does not make the humming go away. We have the FXO port plugged into a TAMB2 unit and then from there it goes to our punch down blocks and wired up from there.

We are experiencing a constant humming sound coming from the over head paging speakers. We are using FXO ports on our Cisco Callmanager 9.x and paging does work when the paging number is dialed. Why would we hear a constant hum

bump

Man you make it sound easy, but I can't make it work. Here is what I have Translation 31XX Nate_Partition Calling Search Space should be? Restricted for Calling Name/Calling Line ID Nate_CSS Nate_Partition MainPhones - I can call the phones in my facility The only thing that lives in the...

Wouldn't I mask it through a translation pattern? If I could mask it I should be able to restrict it.

Thank you for the response. I did find those options under the "more" button. The client works pretty slick, and the video portions seems ok on our network. This forum is awesome, btw!

All phones that are in my building. I only want to push my name to the called phone.

I need to block my internal caller ID so when I can another phone in-house it will restrict my extension but display my name. Here is what I have. Partition - Nate_PT Translation Pattern Translation Pattern: 3104 Partition: Nate_PT CSS: What do I need in here? I then have Calling Line ID...