Recent content by morgansdad

I concur "Its just dial-tone. At the end of the day everyone usually gets to go home.

I agree, disconnect everything from your BCM to pinpoint the problem. Remember to use the original MSC card on the "new" BFT. "Its just dial-tone. At the end of the day everyone usually gets to go home.

I have had the same problem with the telephony svc not expanding and it did end up being the Java version. However we also had the MSC card connection problem and had to do a platform initialization. "Its just dial-tone. At the end of the day everyone usually gets to go home.

The call register values are different for every PBX. This one was for about 300 users, no voice mail. PARM LPIB 1000 HPIB 1000 500B 500 SL1B 250 NCR 1000 MGCR NULL CFWS NO PCML MU ALRM YES ERRM ERR BUG AUD DTRB 100 FCDR OLD PCDR YES TPO NO TSO NO "Its just...

Crickets.............. "Its just dial-tone. At the end of the day everyone usually gets to go home.

Narrowed the problem down a little farther. If you call a T7316 from A to T7316 at B you are unable to make another call for about 20 seconds. But if you call a T7316 from A to a IP softphone at B it works as it should. HELP..................... "Its just dial-tone. At the end of the day...

Had this problem recently. If I recall the patch you loaded is the core patch and if you read the instructions carefully I'm pretty sure it required the OAM patch first. Install the OAM patch and all should be good. "Its just dial-tone. At the end of the day everyone usually gets to go home.

Is it possible to make conference calls using these sets? "Its just dial-tone. At the end of the day everyone usually gets to go home.

Be careful what you delete or modify..... "Its just dial-tone. At the end of the day everyone usually gets to go home.

That did it, hmmm, something must have happened overnite. However there is still a problem with dialing over the IP trunks between sites. When site A calls site B the call will establish, if you hang up and call site B right away, the BCM tries to grab the same trunk and the call wont'...

Going to try it now, will let you know... "Its just dial-tone. At the end of the day everyone usually gets to go home.

Had to REINSTALL the Core patch and the OAM patch. All is working fine now... "Its just dial-tone. At the end of the day everyone usually gets to go home.

For some reason on my BCM400 3.7, the NetLink Manager just went down and will not come back up. Rebooted twice and still nothing. Try to enable it and stays disabled? Any ideas? "Its just dial-tone. At the end of the day everyone usually gets to go home.

I have recently put together a new BCM50 2.0 and when I go to try and change the DN length or select a few of the options to change, I get an error that pops up "General Error" I OK to all and still cannot get to any of those options. I have downloaded the new Element Mgr from the BCM50, the...

Tanberg slr5 external