Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by mixtrix

  1. mixtrix

    Dial tone

    Hello,I Havre S8300+G450 main an 4 S8300lsp+g450 in 4 different suites, in 1 site in 10 Phone 9611G I dont Havre a dial tone. I chance the Phone, I did test dsp in g450, I chance dsp card in the g450, I test the G450, I have always the same problems in the same phones in the same branch.. Any...
  2. mixtrix

    licence avaya R6.1

    Hi, In avaya R6.1 are there different between analogic digital or ip licence? Tnks!!!
  3. mixtrix

    cover patch hunt doesn't work avaya R6

    I've 2 call-app open on station 8888 and two station with brdg 8888. the station 8888 go to cover 26 for busy goto vdn 1111. vdn 1111 go to vector 22. vector 22 go to annuncment 11 and than route to station 8888. So if I call 8888 when the channel are busy, I listen the annuncment and then the...
  4. mixtrix

    change password pbx cs1000

    Yes sorry!
  5. mixtrix

    change password pbx cs1000

    Can you explain exctly the procedure? I know that i can change the psw in ld 22 Ch pdw Bat wich one is the level 1 or 2? How? Then I ve to reboot the cs 1000? I ve to do that on cs1000 and 2 minics1000 Thanks
  6. mixtrix

    change password pbx cs1000

    I ve the second level password. My release software is 5.50. Thanks
  7. mixtrix

    change password pbx cs1000

    Hi, anyone know how to change the password level 1 about nortel cs1000??? Thanks!!!!!
  8. mixtrix

    HUNT GROUP problem

    I tried these but the problem is that the voice messagge start when all the 10 channells about the 5 users are busy and there are 2 calls in queued. Thanks !!!!!
  9. mixtrix

    HUNT GROUP problem

    Hi I've IP èPhone 9611g avaya on Aura R6. I build a vector that go to check in holiday table and if ok go to hunt gruop 2 in hunt group 2 I've 5 phone number in mode ucd-mia no acd vector yes no queue. Every thing work fine!!! The problem is thath I need in incomimg maximun 2 calls after have...
  10. mixtrix

    display show DN plus N, H, L

    ok thanks!!
  11. mixtrix

    display show DN plus N, H, L

    Hi guys !! Anyone to Know what's significate when nortel cs1000 come to call by other nortel 11c o avaya when the display show DN L,N,H....(2036 N - 2036 H - 2036 P- 2036 L) ???????? THANKS
  12. mixtrix

    CLID problem on the slave centrals

    This is the main nortel dch trunk-avaya: REQ prt TYPE adan dch 44 ADAN DCH 44 CTYP MSDL GRP 1 DNUM 15 PORT 0 DES AvayaISGF USR PRI DCHL 44 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC ISGF PINX_CUST 0 ISDN_MCNT 300 CLID OPT0 CO_TYPE...
  13. mixtrix

    CLID problem on the slave centrals

    I' ve a CS1000 meridian whith 4 other centrals Meridian 11c in trunk ip. I've a avaya trunk qusig on CS1000. Now, when Avayal call CS1000 on the set display I see the DN (es. 5012), correct. But, when avaya call other centrals Meridian 11c on the display i see more 3 digit (es. 0005012)...
  14. mixtrix

    help!!clid dmi??????????mask number local call trunk qsig.....??????

    I correct in the DMI ctpy in NPA and now work good!!!! Thanks!!!
  15. mixtrix

    help!!clid dmi??????????mask number local call trunk qsig.....??????

    LIKE THIS DOESN'T WORK!!![thumbsdown]
See more

Part and Inventory Search

Back
Top