Recent content by mikerroy

I am trying to set up overflow routing from a Nortel to a Fujitsu 9600M R12 via a P2P T-1 and then out to the PSTN. I am getting silence and then a busy. I am not sure how to allow thes calls to connect. Any help would be greatly appreciated. Mike

Perv2, Thanks for taking time to respond to my question. I was not even aware this feature was available from Fujitsu. Thanks Again Mike

Hi, I am trying to find out the F9600 running r12 software supports B-Channel Service Messaging. Thanks for any help you might have regarding this question> Miker

We are not trying to route the analog trunks, we want the 4 analog "Lines" to route across SIP to the CS1000 and use the PRI's at that location. We are trying to assign DID numbers to the 4 analog lines on the SRG. These line will be used for fax and credit card readers. We want to cut back to...

Can anyone help us with an issue we are having with an SRG/BCM50? We are trying to route the analog station lines on the SRG across SIP to the host PBX a CS1000 to go out the PRI's on this PBX.We are on a 5 digit dial plan with 7 front ending all of our numbers. We have 7A as a destination code...

Sorry Guys, I thought I changed threads. Mikerroy

Can anyone help us with an issue we are having with an SRG/BCM50? We are trying to route the analog station lines on the SRG across SIP to the host PBX a CS1000 to go out the PRI's on this PBX. We are on a 5 digit dial plan with 7 front ending all of our numbers. We have 7A as a destination...

telm59, Thanks you your feed back. That is what I was thinking. Qwest keeps telling us that we need to send a different number when calling 911. I informed them that is not possable with our PBX we can only send out one number to all callers. Thanks Again mikerroy

Hi All- Does anyone know how to program the F9600 R-12 to send a different number other than the DID, when calling 911 only? We have the whole 10,000 block of numbers in this calling area. We also are connected to the CO via PRI with a billing number. This is the number that the 911 center...

Pixelese, Did you ever get the R12 Commands Manuals? I have them on a CD that I could send to you> Mike

G.W.North, Thanks for the information. That was along the lines I was thinking. I did end up deleting the office code in the ARSR tables. I have since restored the ARSR tables to allow calls once again to this office code. The problem we had was, we cut over to a new software platform that...

I need to know how to restrict a local number from being dialed on a F9600 R-12. Any help would be great. Mikerroy