Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by mccullrr

  1. mccullrr

    WDS & Backup WDS

    Is a backup WDS configured the same as the primary WDS except for the priority number? Thanks!!
  2. mccullrr

    TFTP traffic

    I'm not sure this is where I should post this or not, but was wondering if you might be able to help.... I am using a WLSE and trying to archive the configurations but receiving this error... Please make sure that TFTP traffic is not blocked between the access point and the WLSE box. Can...
  3. mccullrr

    WLSE and WDS setup

    figured it out. Had to add wlccp wnm ip address
  4. mccullrr

    WLSE and WDS setup

    Hello all. I am setting up several WDS APs via Cisco's documentation. I am also using WLSE to monitor these devices. I have set up my WDS AP and several infrastructure APs, it all looks to be set up correctly. I can see on the WDS AP that it finds and registers all other AP's. My problem is...
  5. mccullrr

    SSID

    Thanks :-)
  6. mccullrr

    SSID

    How do I make it so that my SSID is not broadcasted? The following is my current config.. sh run Building configuration... ! enable secret 5 ! ip subnet-zero ip name-server ip name-server ! ! aaa new-model ! ! aaa group server radius rad_acct ! aaa group server radius rad_mac server...
  7. mccullrr

    How Secure is Remote Desktop Services

    Hello. I am the Network Administrator of a college campus. I have several administrators requesting remote desktop access to their office machines. Does anyone know how secure this is? Remote Desktop is blocked via our firewall and I would have to open up the port for the particular office...
  8. mccullrr

    Turn on http for a 3550

    Figured it out. It was an acl blocking it.
  9. mccullrr

    Turn on http for a 3550

    Yep..... It is all the same.
  10. mccullrr

    Turn on http for a 3550

    Thanks RNF0528. I'll take a look at that. What is mind boggling is that I have another AP that is configured the exact same way and it works.
  11. mccullrr

    Turn on http for a 3550

    No luck. Any other ideas?? Becky
  12. mccullrr

    Turn on http for a 3550

    Thanks. Here it is... no service pad service timestamps debug datetime msec service timestamps log datetime msec...
  13. mccullrr

    Turn on http for a 3550

    Thanks... I have snmp-server community xxxxx ro snmp-server community xxxxx rw snmp-server enable traps tty And still not working.... Any other ideas or do you see what I am missing?? Thanks, Becky
  14. mccullrr

    Turn on http for a 3550

    I'm having a problem with my access points and web access. I have entered that command ip http server, but am still unable to access via http. Any ideas?? Thanks, Becky
  15. mccullrr

    Windows Vista Wireless Users

    I am running several Cisco 1200 series Aironets. Some are open wireless and some are mac authenticated. Windows XP users can connect to either fine, but I can not get any of my Windows Vista users to connect. Does anyone have any ideas or thoughts? Thanks, Becky
See more

Part and Inventory Search

Back
Top