Recent content by martincom

I thought about installing CA on my home NS700, but ultimately decided against it. I did acquire several version of CA software. I've attached the latest I have. There is documentation within the zip file. Panasonic did away with all license requirements when they exited the phone business...

Do you a separate PBX or key system in the other building or is it all served by one?

I don't have any NS1000s in service. So I can't send you a screen shot of the online console page. I'm assuming you have a pdf copy of the manuals. Open the Feature Manual and utilize the "Find" command from the Edit drop down menu and search for "CPC" or "Calling Party Control". If you...

Possibly you have Calling Party Control Signal Detection (CPC) enabled and it is being triggered or falsed when the cell phone answers. You may want to disable it and see if the problem still occurs. There are some other parameters that interface with CPC that maybe at issue. I'd suggest you...

The "Find" tool is your friend. Open the pdf for the PC programming manual. From the "Edit" drop down menu, select "Find". Type "gain" in the "Find" search box. The first entry will display the table of contents for "audio gain". This will point you to the page in the manual where it...

There is also a link for KX-NT550 firmware within the same post as the v9 firmware you downloaded. I have no idea if that will resolve your issue or not.

You may want the latest manuals to go with the v9 firmware. See this thread for the download link and the password to unlock the manuals. I don't if the password will unlock the German language manuals or possibly a translated password???

EMJP posted a link to v9 firmware for both the basic cabinet and the expansion cabinet. There is also a link there for v9 maintenance console as well as some other firmware for cards, etc See this thread.

See this link on how/where to download the manuals.

At the end of the Programming Manual, it has a section titled "Feature Programming Reference". Within that section, find the feature "Time Service". It will ist all the related programming sections. This should guide you in what you need to program.

What you are attempting to do is add "Tie Lines" between the PBXs. The Feature Manual details what is involved. Look for "Tie Lines" within the network section of the Feature Manual.

I didn't on mine, but I have a bit of a different method that we handle after hours calls. As I mentioned in my previous post, its been a couple of years since I last dealt with this. I'm sorry, but I just don't have the time to research the documentation and then apply your scenario to arrive...

If this is a new installation/power up, it is normal for the status indicator to blink during initialization and will take approximately 2.5 minutes to cease blinking when switched to normal. If the flashing occurred while in use, the installation manual details what the different flash...

It is about as clear as mud in the documentation and it did take me a bit to figure it out. The last time I dealt with this was about two years ago, so I maybe forgetting something. Yes, you do have to configure the calendar. You'll also need to create incoming call groups: PBX...

I'm in the same boat you are, a KX-NS700 with UK voice guidance prompts deployed in the USA. I'm just utilizing this in my home. It is just my bride and me that have voice mail boxes. So we just live with the British accent of the UM system prompts. From what I've been able to determine, the...