Hi folks,
I have in my inside LAN http server and users form Internet can open it with external IP address.
How can I set up cisco 3620 for my internal users that they can use inernal or external IP address of http server?
This is my partial config:
interface Ethernet0/0
bandwidth 2048
ip...
Hi Viperman
Your's configuration is OK and it's must work. The problem is on 192.168.20.1 machine, check on default gateway, firewall. Maybe try connect from other computer in your 192.168.20.0 LAN to this services (25,3389).
regards
Mac Foxx
thanks psmv you have right.
I changed slightly your advice but it's works, I had problem because I need to connect to device on inside LAN witch have default gateway to other router not to pix. But one-to-one nat resolved all problems.
Mac
Hi folks
Maybe someone help me!
I have PIX 515E (6.3) I have 3 networks Outside, Inside and DMZ. Everything works fine, computers from inside LAN can access to Internet and DMZ, computers from DMZ can access to Internet, but I need to establish for two computers ip address 192.168.0.10 and...
Hi folks!
I try to extract some informations from sendmail log, but I have a problem.
This is the input file records:
Date Time MessageID1 person1@domain1.pl
Date Time MessageID2 person2@domain2.pl
Date Time MessageID3 person3@domain3.pl,person4@domain3.pl
Date Time MessageID4 person5@domain1.pl...
Hi
You can install Backup exec like "Other ASPI compatible" and load nwaspi.cdm before starting bestart.ncf, be sure that your drive is connected alone to single port on SCSI controller.
Bye
Mac Foxx
Hellow
Yes it's possible but you have modifiy NTFS rights for this folder.
Choice properities of folder, than security tab and give proper rights for Creator_owner and for everyone
Thanks Terry for your reply, I find rsync it's great tool I didn't know it, I know toolbox but it isn't smart enough and i have one big problem I can't use rsync because I have the worest version of netware it's 5.0 but rsync is realy cool and I will use it on SUSE.
Regards
Hi folks!
I need advice, I'm looking for a tool that can copy files from one server to other by WAN in vpn tunnel in all directions and it only copy files newer than existing. I know tool for MS it's robocop but is ther something like that for netware?
Thanks for any advice
Mac Foxx
Thanks Fdurham for your response but I temporary resolved problem. I made split tunnel in configuration and I permit only access to lan 192.168.0.0 on pix and deny to others, before vpn client had access to 0.0.0.0 lan and that's why all request on remote computer was sent to tunnel, now only...
Hi
I try to find how to enable "local LAN access" for software VPN clients but on Cisco site I can't. I enable this function in client but when I'm connected by VPN I don't have access to any resourec on my local lan. what I need to change in my PIX 506 configuration? Thanks for any help...
Hi RayMac
I agree with Joamon make this modification on your routers also check your route on PIX it's must be something like that:
route inside 10.0.253.0 255.255.255.0 10.0.0.51 1
Regards
Hello
I had similar problem and I resolved it that i remove ip address from interfaces of routers with connect remote and main office.
ISP router
|
|
Outside ip
PIX Firewall in main office (nat)
192.168.0.1
|
Lan 192.168.0.0
|
192.168.0.3
Secondary Router C1600 in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.