Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jf5801

  1. jf5801

    SIP Trunk from 3com VCX to Mitel 3300 7.1

    Yes, HP, just bought them out. So I have never configured the VCX, could you share the config for both?
  2. jf5801

    SIP Trunk from 3com VCX to Mitel 3300 7.1

    thread1329-1667564 I am referencing the thread above. Did anyone ever find a solution to this problem? I need to do the same. Migrating form 3com to Mitel in a phase approach.
  3. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    Thanks for the help. I think I understand now.
  4. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    it's funny how much you learn from asking questions and research...so those other 15 phones are 4015s and 4025's which of course are not IP phones but supersets. so when i navigated to desktop devices assign I only see 2 extension and they are assigned to 5340s ext 280 & 290...but when I went to...
  5. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    ok. that makes sense to me, I am very familiar with the 3300, so it's starting to make sense. so my last question I hope... where do i go to look @ all of valid ext that are assigned to an active on the network phone. I went to desktop devices assign and i only see 2 extension and they are...
  6. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    ok. about to step out, but i wll do that when i get back. thanks for the help. i will let you know ASAP.
  7. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    PRI
  8. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    i cannot seem to post... on Entry 01 i have 1 under QTD comments local & 911 03 I have 1 under qtd comments Int LD
  9. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    sorry let me do that again.
  10. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    Ok. so in form 54 all of the ext are blank so i am going to assume that nothing is being altered and that they are going out based on main DID that verizon is providing me so i think i get that and that's where i can change the outgoing portion of it. But what is *4*6$ in form 22...i will attach...
  11. jf5801

    SIP trunk between CUCM 7.1 and mitel 3300

    thanks guys...My new Australian buddy solved my problem. I had the SIP trunk attributes set incorrectly on the Mitel side.
  12. jf5801

    SX-200-ICP assign an extension to an outgoing CPN

    How can I specify an outbound CallerID for each hand set? The business has a wide range of DIDs on the PRI and I need to assign 5 of out the 30 phones with a different numbers. So how do I assign an extension to an outgoing CPN?
  13. jf5801

    SIP trunk between CUCM 7.1 and mitel 3300

    I have read through the PDF for this set up 3 times and i cannot get phones on either side of the PBXs to ring. the sip link us up, but when i call a cisco phone from a mitel phone, i get invalid number. I have routes set up...help
See more

Part and Inventory Search

Back
Top