Recent content by HP4KSME

Actually the HiPath 4000 and HiPath 8000 are rated as the number 1 systems in their respective catagories by several well-respected consulting firms and magazines worldwide. But that is beside the point. I understand that Siemens has a strict policy regarding documentation. I do not fully...

Brief history on the Hicom 300: it was developed in the early '80s for the European/International market. In 1989 when Siemens bought in to IBM/ROLM, development began in Boca Raton and Santa Clara to convert that existing Hicom 300 into a switch that could support US trunks, US features such...

Hi Dmitry. We are experiencing an 8 hour time difference. The failure of "dipas_batch" indicates that the pipeline between Unix and RMX is in trouble. This pipeline is driven by a service called "mpcid" (multi-purpose client interface daemon). It is OK that the two processors switched "Active"...

In Procomm, click Options >> Data Options >> Terminal Options, and select Pansi3 in the "Terminal Keyboard File" field.

Wow. It looks like you have some big problems. First, your HiPath 4000 version is V2.0 SMR 10 SMP 3. I got this from your "getosversion" command, where the results indicated "CV322". "CV322" is a Siemens internal name for V2.0 SMR 10 SMP 3..also known as V2.0 RL 10 PP 3. Second, the...

When you re-installed Unixware on the HiPath 4000 hard disk, it wiped everything on that side of the hard drive. So there is no chance that any residual firewall entries are the problem. CAT client is used on Siemens employees PCs to improve security. So unless you are a Siemens employee, it...

You had to ask that! I was a ROLM service tech from 82-89, and got absolutely sick of working on stations. Now in my Education/course development role I focus on the HiPath and its applications - only. I can barely forward a call myself - if it weren't for OptiGuide! Sorry! Hopefully...

OK Dmitry. The procadmin looks somewhat normal. Apparently "lap2" no longer appears in that display - I double-checked my switches to verify. It appears that you may have a Config Management problem (your "cmproc_dbwrite" process/daemon is Inactive), but that is NOT your problem right now...

Dmitry, is this a "live" system or are you just installing now? That is a problem that I have not seen. Is there a SIM on the ADP processor? If I were you, I would power down the cPCI shelf, and then remove the ADP board. Enough memory? SIM installed correctly? Re-install the ADP. Make...

Now that you have re-installed Unixware, try this: connect your PC's NIC to the HiPath's customer LAN port - using crossover LAN cable. The customer LAN port's IP address will be 192.1.2.5, so make your PC's NIC 192.1.2.100 (class C). Launch your browser, and use URL http://192.1.2.5. Try to...

I have a document that provides some details on setting up the connectivity between the Crystal Report application (you must purchase that software) and the HiPath 4000. This connection will allow the HiPath 4000 to export its customer database to Crystal Reports. Building the actual report is...

I don't usually work with Config Management, but I will look in to it for you. Check back tomorrow.

Just ask for John L in Education. Your contacts know me well. See you.

Absolutely. Use the Import/Export API (XIE) under Assistant >> Utilities. Click "Install Export Client Table", and it will install on your client PC, and can be launched by clicking START >> Programs >> HiPath 4000 >> Export Client Table. Setup the connection to your switch by entering the...

From a Start >> Run >> Command prompt on the Xpressions server, use the "infotool" command to export the user data. The results will be tab delimited. Then use MS Excel to sort and print. I do not recall the exact "infotool" command, so hopefully someone else can provide the details.