Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
hooktom's latest activity
-
hooktom replied to the thread trunk seizure without prefix.But I think this is not a defect In normal mode, the ability to connect by pressing the first digit of the telephone line is pleasant...
-
hooktom replied to the thread trunk seizure without prefix.hi REG-COP:8; H500: AMO COP STARTED ADD-COP:8,DTMF&EOD&SFRM&RLSB&RLSA&BR64&TDED&NO1A&DITW&TIM1&NSDL&IDP2&DTM1...
-
hooktom replied to the thread trunk seizure without prefix.ADD-LDPLN:LCRPATT,0,"99"-"X",0,20,,,1,,,,N; {of course I tested with these LDPLN but the same problem exists...
-
hooktom replied to the thread trunk seizure without prefix.My system is 4k and phone work in HFA mode
-
Hi guys I have a user with a phone (IP 35G) and I want to send every digit that this subscriber dials directly to an analog trunk...
-
hooktom replied to the thread analog trunk not working.I searched and read ptime related issues on the forum based on your answer - and then I realized that the (P) parameters were probably...
-
hooktom replied to the thread analog trunk not working.Thank you very much Moriendi My problem is solved I had used table number 5 in circidx and by changing the P6 from 97 to 50 in this...
-
hooktom replied to the thread analog trunk not working.hi Moriendi i test it by SLMA .But no digit sent .
-
hooktom replied to the thread analog trunk not working.I will definitely do that test tomorrow and send the results. I sent DIS-PTIME. Results. Is your request something else? REG-PTIME...
-
hooktom replied to the thread analog trunk not working.AND DIS-PTIME:REST; H500: AMO PTIME STARTED REST TIMERS: =============...
-
hooktom replied to the thread analog trunk not working.Hi Moriendi and thank you for your response. for the first test, I haven't done it with the SLMA card , but I have several analog trunks...
-
Hi I used an analog trunk to connect Siemens v7 (hicom) and Alcatel (oxe ) by connecting an analog port from oxe to a trunk port from...
