Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by garberanalyst

  1. garberanalyst

    Error Message DBNETSX

    Does anyone know what this error message means cannot find anything: DBNETSX: system_is_busy - Protocol Err= 2
  2. garberanalyst

    Twin feature on SX200 ICP

    Does anyone know how to use the twin feature on an SX200ICP. I have a feature acces code of **61, but do not know what else to do
  3. garberanalyst

    53xx stuck on applications loading

    I had the same problem. Except i had it through a teleworker. You most likely have a firewall problem, that specific ports are still blocked. This is what I used: The (modified) ports\protocols for these ip mappings are as follows - tcp 3300 tcp 35000 tcp 37000 tcp 6800-6802 tcp 6880 udp...
  4. garberanalyst

    ACD HOT DESKING

    I have a person say at Ext 1234 in City A. They use the ACD hotdesk feature log into City B as 5678. How do i get the ext number 1234 not to ring busy?
  5. garberanalyst

    Can the mitel switch do intelligent routing

    I currently have a mitel 3300MX controller with a voice T-1 (PRI). Is there any type of an application that can look at the number coming in and route a phone call to another 3300 via via the area code of the number.
  6. garberanalyst

    5330 phones connected via Teleworkers

    The T/W blade is 7.0.2.9
  7. garberanalyst

    5330 phones connected via Teleworkers

    I am having a problem with my 5330 phones, when they are connected via a Teleworker. Once connected the phone display constatly says applications loading. The lCD display never displays any information. Does anyone know how to correct this? Thanks

Part and Inventory Search

Back
Top