Recent content by esqi

Hello, Looking for info re integration for Skype for Business and the iPECS. Our distributor in Australia is a little slow with this stuff, needed some info. Am i right i thinking you could integrate it as a trunk or an application level? For trunk its a matter of having the RCC gateway do...

Step 1. Upgrade & Install iPECS MFIM as per standard. Step 2. Have an IT administrator install OpenVPN Server with a WAN port on the router side and LAN port on local device side (or as per Appendix A). IT administrator will create client user accounts as required. Step 3. Register the handset...

The handsets have been rebooting still, I had been talking to a colleagues about it off the cuff when it was suggested there may be a loopback happening and that the spanning tree may have something to do with it. So I took a look at the spanning tree options and there was a global option that...

Checked current power usage and its 84 / 400 watts used/available. That is all idle, so i had a quick look around and the min / max is 2.10 / 2.52. lets multiply that by approx 42 handsets 105.84 max from the switch. Now im pretty sure the individual ports deliver much more (over the min/max)...

The restarts happen early morning or late afternoon when office is barely attended. I did check the load power wise and from memory it wasnt near the max threshold. Although I will check again, thanks.

Hello, I look after a iPECS 100, which has about 42 stations which are all LIP8024e units. The problem this customer (and i!) are facing is that once every 1 to 2 days the handsets lose connection to the system. The MFIM is not randomly restarting, nor is the switch. The switch is a basic...