Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by dvbishop
-
IPSEC Passthrough on PIX
PIX model nubmer is 515-E.- dvbishop
- Post #2
- Forum: Security, hacker detection & forensics
-
IPSEC Passthrough on PIX
I am working with a site that has a pix firewall (waiting on model number from the site), and am attempting to establish a VPN connection from a Netscreen NS5xt behind the PIX to an NS500 at my home office. He is NATing a public ip to an internal ip for the NS5xt. Currently the tunnel is...- dvbishop
- Thread
- Replies: 1
- Forum: Security, hacker detection & forensics
-
3500 Telnet Errors
Thanks.... I have tried hyperterm, and DOS. I will try putty and SecureCRT. From further research, it appears I may have to use the console and rerun setup. Thanks again for the response. -
3500 Telnet Errors
When attempting to telnet into my 3500, I receive 3 Password prompts and then a %Bad Password response and the session exits. It does not give me a chance to enter a password. Below is the output. Any ideas on this? Is telnet disabled? If so, how do I re-enable telnet? User Access... -
2950 MultiVlan?
Can you configure a port on the 2950 for a mulivlan? For example can port 20 belong to both vlan 3 and vlan 4. The 2950 was bought as the suggested replacment unit for a 3500. The 3500 has multivlan capability, but we have been unsuccessful in finding infomration on multivlans for the 2950.
