Recent content by digiteltlc

This is driving me crazy [bugeyed] Provider sip trunk ---- asterisk ---- sip trunk ---- TDE600 ---- ISDN Calls from provider sip trunk come to asterisk extension That extension is forwarded to an outside number (it doesn't matter destination is fixed or mobile number) via a sip trunk to...

No fields about sip domain in config xml file.... It seems to ignore digest authentication request coming from pbx.... ->REGISTER <-401(Unauthorized) ->REGISTER <-401(Unauthorized) ->REGISTER <-401(Unauthorized) 5558501mS SIP Rx: UDP 172.16.217.203:49159 -> 172.16.217.105:5060...

Yes third party license is ok Really don't understand why a spa504g or a softphone registers immediately with same credentials... Again, 7975g registers correctly to freepbx or freeswitch systems....

I have a Cisco 7975G failing to register to ipo500 The same phone registers correctly to Freepbx and freeswitch pbxes A cisco spa504g with the same sip credentials registers correctly to ipo500 This is the line config : <line button="4"> <featureID>9</featureID>...

* wildcard in Local URI, Contact and Display fields does the trick ! Thank you all for infos.

Tried just now : Configured a new incoming call route with Asterisk trunk group ID, no incoming number, period as destination , but no luck : From = <asterisk_ext_no>@<asterisk_ip_address>, To = 1234567890@<IPO_ip_address>, Answer = 404 Not Found Any thought ?

Yes, incoming call from a trunk has to be processed by an incoming call route, you're right, my fault.... Thanks.

HNY I have a sip trunk between Asterisk and IPO500 How can I made a called number from asterisk to pass through IPO500 and dialed to outside line (BRI in this case) ? Asterisk has an outgoing rule: dial 1234567890 through IPO500 trunk. When IPO500 receives 1234567890 , it answers back "not...

We were repairing partners for our national phone company (small branch) many years ago 80s-90s I have not a great skill in switchmode power supplies (and all technician will say you they're tricky) However, I repaired many faulty V1 power supply (that fit V2 also) simply replacing a 30cent...

Anyone has discovered the cause of faulty power supply ?? Anyone so kind to share his repairing tips ? If it's something extremely easy as V1 PS fault , it would be nice to know.....[peace] Thanks

No one ???? Or anybody experienced in repairing ??? Thank you

Does anybody have Delta TDPS-138AF A power supply schematics to share ?? Or know if there are any common components prone to fail (as the capacitor on older power supply model) ? Thank you.

For who needs.... Successfully installed, On ESXi host , right click virtual machine, guest - Install/Upgrade VMware tools This provide vmware tools package to be available into VM cd-rom Once cd-rom is mounted and file unpacked it can be installed (mostly pressing enter to all installation...

Yes, older versions was not tuned for vmware, Anyway, to make a quick backup or a copy of entire vm is easy so I can play and eventually mess up the whole system while trying to install vm tools some way. Restore is a simple task. I hope to accomplish in a durable installation ...

As far as I know, for Virtualization host (the virtual machines container , ESXi in this case) to take control over virtual machines in case of system maintenance , graceful shutdown by i.e. ups event after power loss etc, VMware tools have to be installed on each virtual machine running inside...