Recent content by diegokpy

Hi, nop its not working. With tandem setting.

Ok, share the publib table.

I share de PUBLIC

hello I have two TRUNKs, the first is an E1 that receives incoming calls, and then sends it to the second that is a SIP TRUNK against an SBC. The problem is that the CALLERID number that was sent through the SIP TRUNK is cut off in the last digit. I share the TRACE. Like you see, the last...

I need knows how I have to config the SBC and SESSION MANAGERS for the external persons of my networks, try to conect from the own celphone (aplications One X Mobile)to sesión managers. I read some manual but nothigs happens. Any informations or especifications will be a big help to me. Best...

Thanks to all, I Fix the problem. With the setence "copy tftp module mm711h20v73.fdl IP SERVER + BOARD" when we upgrade the firmware from the SERVER 8xxx, we dont have put all route just we need put the name of the file, like the example.

Sorry, but I'm still having the problem anyone knows of any SFTP you can use for this? and if so where I can download it?

Sorry but I try in both forms and happens de same things, does any body happens this before?

I try with .fdl and nothings happens.

Hi all-obviously we have done tons of these and all of the sudden we are getting this strange failure. We recently upgraded to CM 3.1.2 with the latest patch applied aand had a few transfer issues that an Avaya engineer told us would be resolved by applying the latest firmware upgrades. All...

Send de Print of CM change ip-network-region 5 Page 1 of 19 IP NETWORK REGION Region: 5 Location: 1 Authoritative Domain: IPOfficeCBA1 Name: Regionales SIP MEDIA PARAMETERS Intra-region IP-IP...

Sorry for the last post I asked these draw to advance the resolution of the problem, try to help you to help me.

Lo siento pero en el ultimo post me solicitaron esos trace para avanzar con la resolucion del problema, intento ayudar a que me ayuden.

Ok, send the trace of call CM to IPO (the is good and not have a problem) LIST TRACE time data 00:54:59 dial 1952 route:UDP|ARS 00:54:59 term trunk-group 7 cid 0x1220 00:54:59 dial 1952 route:UDP|ARS 00:54:59 route-pattern 62 preference 1 cid...

The inconming is working but the outgoing call no, and the trace in the TAC of the CM for incomning call is empty. Other question?