Recent content by ConfusedEngineer

IPOSS won't update from r7, has to be r8 or above. AIPS/ACSS

Do the lines definately have COLP enabled? AIPS/ACSS

Thanks pkdev. It's with site to test now! AIPS/ACSS

What lines are you dialling out on? What software level is the IPO running?

pkdev: I was hoping to avaoid the prefix for outbound dialling, but I think it will be the only way! The DDI presentation... I have an incoming route from the audiocodes trunk of incomming number * with destination of . This appears to be working OK. Calls route to EXTN on the Avaya or...

We were told that is how they were doing it, no option was given, site simply asked us to provide a PRI trunk for them to connect to. I can see it being ripped out in the future! AIPS/ACSS

that's correct. Lync dials out via AudioCodes gateway PRI to PRI on the Avaya, then makes the call out from the Avaya by either another PRI or SIP depending on the Users DDI (some have DDI on PRI trunk some on SIP) AIPS/ACSS

Hi Guys, I have a client with IPO500 on r9.0, they have had an Audiocodes Gateway installed to connect Lync to the IPO using a PRI trunk between IPO and Lync Gateway. Site dials out over another PRI circuit OR a SIP trunk. The easier part: Using Twinning to existing users calls are working...