Recent content by claudiotele

these are the settings monitor

I used the certificates sent by the operator, but Microsip does not use a certificate and it works.

I programmed a Sip Trunk with TLS but it does not register with the IPO500v2, but with Microsip Softphone it registers. Can someone help me?

thanks

how can I differentiate internal dial tone and secundary dial tone?

ok thanks

Its working very well now Tanks again

....... and ProxyIp 0 = 10.0.1.320, -1, 0; This was a corruption in the .INI file thank you all

tanks a lot again the problem was - SIPGATEWAYNAME = 'gateway.com'

;************** ;** Ini File ** ;************** ;Board: MP-118 FXS ;Serial Number: 2477215 ;Slot Number: 1 ;Software Version: 5.80A.023.006 ;DSP Software Version: 204IM => 580.05 ;Board IP Address: 10.0.1.34 ;Board Subnet Mask: 255.255.255.0 ;Board Default Gateway: 10.0.1.1 ;Ram size: 32M...

sorry, but dont work I tested with xlite and worked

I made some changes and it worked whit sip trunk. i would like to setup with sip set, using 3rd Party IP Endpoints. Its work? I created a sip user, but can't register in IPO.

I can not make external calls from Audiocodes, only to set extensions on IPO. any idea?

Tanks a lot, its ok now

Can someone help me set up a sip extension with AudioCodes MP-118?