Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by clarkstyx18

  1. clarkstyx18

    SCN on Wan Port of IPO

    ok, I will try all of your suggestion and I will update you.. Thank you guys!
  2. clarkstyx18

    SCN on Wan Port of IPO

    ok, I will do that, but one question, does routing of LAN1 necessary even though I am only using LAN2 for the H323 trunk?
  3. clarkstyx18

    SCN on Wan Port of IPO

    ok, im posting the config file, please have a look :)https://www.dropbox.com/s/wjjzj9wlkpmy7sm/Tasheel%20Barsha.cfg https://www.dropbox.com/s/p2v8qdw0z7s3rql/Tasheel.cfg
  4. clarkstyx18

    SCN on Wan Port of IPO

    Sorry bout that... 192.168.11.10 is nothing.. ill upload the config file in a few mins.. thank :)
  5. clarkstyx18

    SCN on Wan Port of IPO

    192.168.10.205 and 11.205 are the wan IP addresses of each IP office.. I've tried doing that Ip route you are suggesting but the other site wont ping.. so I have to put the specific ip address of each boxes..
  6. clarkstyx18

    SCN on Wan Port of IPO

    It is the wan ip of site A.. scn are configured through Wan port
  7. clarkstyx18

    SCN on Wan Port of IPO

    this is what I see on the sysmon
  8. clarkstyx18

    SCN on Wan Port of IPO

    yes, they are both h323 trunks, gateway ip address is the IP address of the opposite site.. this will be my 3rd time to setup SCN, first two was a success with Sonicwall and Checkpoint firewall, this site has Draytek 2830 which is my first time in setting up SCN on this router..
  9. clarkstyx18

    SCN on Wan Port of IPO

    okay, so it turned out that SIP ALG is disabled on the draytek router, there is not option for H323 alg as well.. any other ideas?
  10. clarkstyx18

    SCN on Wan Port of IPO

    currently, they are using Draytek 2830 on both sides, Could it be SIP or H323 alg? Im just waiting for the network admin to arrive and we will try disabling the ALG on both.. if this didnt work, any other suggestions?
  11. clarkstyx18

    SCN on Wan Port of IPO

    okay, I just found out that its just an IP route issue, below is my new IP route settings.. Both sites are pinging now but SCN still shows down, tried recreating H323 trunks and rebooting the system but it seems it wont go up. I believe it has something to do with the network, but how can I...
  12. clarkstyx18

    SCN on Wan Port of IPO

    I tried pinging Site A IP Office to SIte B using system status and its pinging, same thing when I try to ping form a computer I tried pinging Site B IP Office to Site A using system status but its not pinging, but from computers, I can ping to the remote IPO
  13. clarkstyx18

    SCN on Wan Port of IPO

    oooopss, yeah its a typo, Site B IP range is 192.168.10.X and not 192.168.12.x
  14. clarkstyx18

    SCN on Wan Port of IPO

    sorry, I didnt get you, can you please tell me whats wrong with my config?
  15. clarkstyx18

    SCN on Wan Port of IPO

    i did this setup and its not working.. in addition to my config above Site A IP Route 0.0.0.0 0.0.0.0 192.168.11.1 Lan 2 Site B 0.0.0.0 0.0.0.0 192.168.10.1 Lan 2 still it is showing SCN status DOWN.. anyone who can help me with this?

Part and Inventory Search

Back
Top