Recent content by CiscoRC

Depending where you live, check local schools that provides that training. I took it at Syracuse University CBIT Center. Lot's of hands on experience. Google to a near by provider and get prices but remember they are not cheap.

You can run the Capture Text, that will give you a config file on Text from the emulation program. I've tested it, sometimes it's ok but you could also try PUTTY, it's a freeware emulation program.

Mattgtech, yup that's about right that path is correct. ICND 1 = CCENT pass it and take ICND 2 = CCNA....I haven't used that site Global Knowledge much. But a good Ciscopress book is the way to go. I'm waiting for the book to be available at the end of the month. Peace

As I do for precaution, I have a NAS or possible a second drive for all my files and backups that way, when in need to redo the computer from the vendor restoration CD or DVD, I just pop it in, easy...or I get my real license key from MS to do a fresh install, usually Vendor CD or DVDs are...

Jumpers are more likely to have a change in boot sequence and constance beeps if it's set up differently. Every drives are different and are nearly the fact that you must use the first hard drive as Master, then slave for the second. Checks jumper settings on your current hard drive should...

Have you checked the cable from the kb that connects to the mobo? Improper insertion can cause erratic keys and becomes dysfunctional. If nothing else then it must mean you got a bad socket to your mobo. What I used to do is test it on another laptop same brand and model to see if the kb is...

Every computer you buy from a vendor always have a recovery CD or DVDs. If you have warranty and can't do it yourself bring it to the shop where you got it. Otherwise if you have the recovery CD or DVD then it shouldn't be so hard to reset to factory defaults from the Factory itself. Boot from...

First of all, you shouldn't have a Name on the Employees computer because you never know if that employee ever leaves the company. We always use WS 1, WS 2 so on...etc...... Besides, changing the name on the computer has nothing to do with hardware. Every employee have rights to a drive that...

All you need to do is this: BOOT=c2801-ipbase-mz.124-1c.bin sync reset That's all you need to do..if you only have one image that command is not even necessary. I used that router and have worked on this nearly most of the time. Trust me, I know this command I just mentioned will work. Again...

Burst has nothing better to do but gangup on the poor helpless souls...haha kidding... I downloaded all the info, looks sweet....still waiting on my CISCO Press book. Peace *************** R. Corrigan Jr. Network+, (working on CCENT+CCNA)

Grenage, I'm not an idiot, it only says Video, hence the reason why I said "Something" along the sentence. The lack of info thus gives me the lack info on here...Without the proper info for me to tweak the video then I will never know. Maybe it's no compatible, not sure. geirendre, I will...

geirendre, from Windows. I booted from a live cd, then it went to windows. I saw the Set up and install icon on the Desktop to do an install straight to the HD. I just clicked that and tried 2 things, erase all partition and make a new one. That didn't work, then I used extisting partition which...

I was able to Boot the PCLinuxOS straight from the CD, then when it got to windows, then I tried to install the OS onto the drive. I started it but it failed to set the bootloader. So it failed to install..... Don't know what's wrong, it says it's compatible with 2007 machines. I tried...

Thanks for the heads up. I had a Red Hat myself, version 9, then again finally found out that the CD's became bad all of a sudden. It was installing fine but then failed midway through the install process. I no longer have the full version of RH 9, so I'm going to tackle the info qeirendre...

Thank you very much for the links...I will definitely let you know how it worked. I'll get to it when I get the chance. I have a spare HD so I can swap it and get the feel of Linux. I figured Ubuntu was the best starter to learn... Thanks again... *************** R. Corrigan Jr. Network+...