Recent content by ciro64

Hello For the 4500 and 5000 series switches I work with net-snmp for scheduled backup: thread902-1640492 Now I need to backup the 4450. Knows anybody how this does work with net-snmp ? Thanks Nik

Yes, I tried IP directed Broadcast and it works, but I do not enable it, because security. There are some other VLANs. I only need Wake on LAN from VLAN 10 to VLAN 20. So I need to broadcast the WOL magic pakets to 10.1.20.255.

I use the subnetmask 255.255.255.0 in every network. ttl is 4.

Hi I try to enable WOL on 5530 from vlan 10 to vlan20. -newest firmware and tested with older firmware -new config ( boot def.) -Routing enabled -each vlan has a IP: 10.1.10.1 and 10.1.20.1 -enabled routing on vlans -routing between VLANs: OK ( Ping ) I configured udp forwarding: ip...

@ anthonyanderberg Thanks a Lot :-) it's great with Net-SNMP ! Nik

hello does anybody know how to schedule switch backup ? I tried plink (putty) via ssh, but after login the switch does not accept ctrl-y from batch file. Is there any solution ? Thanks a lot Nik

After a break, i found the Code: qos ip-acl name VLAN75 dst-ip 192.168.99.0/24 protocol 6 dst-port-min 80 dst-port-max 80 drop-action disable set-drop-prec low-drop qos ip-acl name VLAN75 dst-ip 192.168.75.0/24 drop-action disable set-drop-prec low-drop qos acl-assign port 2 acl-type ip name...

Hi I need to config ACL on a 5500 Switch, but i can only activate 1 ACL on a port. My config: for allow all: qos ip-acl name "allow_all" drop-action disable set-drop-prec low-drop block vlan75 for allow Web Access: qos ip-acl name all99port80 dst-ip 192.168.99.0/24 protocol 6 dst-port-min 80...