Recent content by cheikhdtn

HI We have IPO 500V2 R 11.0, a user has a 9620L IP phone ( H.323 ) , each time it disconnects and displays a black screen and AVAYA is displayed, no dial tone or anything. To get it to work again, the user unplugs the phone then plugs it back in and the phone works. Any ideas.

Hi We have meridian 11 nortel C51 and two M2250 consoles, the problem is that each time a analog line works well, but makes the return and it rings alone on the console, when the operator picks up the handset nothing. It has become annoying. Is it the LD 16 or LD 14 programming or that is to say...

thanks a lot greggster it's solved.

Hi we have a nortel meridian M2250 console and there is a noise on the console speaker, I changed the speaker but there is still this noise.

yes answered missed calls are recorded on coverage and hunt group (are checked).

only on some a centralized call log the system does not restart

we have IPO 500 v2 R11.1 This has happened on some 1616 phones when users want to check for missed calls. The call log button, nothing is displayed, so previously all missed calls are displayed. A user asks if there is any other solution to check missed calls? (it's important to him).

This has happened on some phones when users want to check missed calls the call log button nothing is displayed so previously all missed calls are displayed.a user asks if there is another solution to check missed calls?

Essential Edition ip phone 1616

System/Telephony/call log settings and User/Telephony/Call log settings.these setting are configured but no display. whereas before it works normally.

Hi We have IPO 500 v2 R11.1.The call log key dors not work and not display missed calls.I programmed a key among the 16 keys for the call log function on the phone 1616 but it did n't not work .

IPOTS Thanks I have ICR config: */. still no incomming calls.id 27/27.URI:*/*/* Other solution.

Please IPoTS Where configure incomming call .is there to URI ?

Hi We have IPO 500v2 11.o is connect with pbx siemens by sip trunk. Outgoing calls work but no comming calls.

Hi we have alcatel oxo pbx, I was not able to connect via LAN with OMC. It tells me that the target product is not compatible with the actual product.