Recent content by C6corvette

This is the issue the extension number you are trying to set call forward on has set Call Back on that station. To clear press speaker or pick up handset and dial the call back cancel code, get confirmation tone. retest call forwarding feature.

Replace the ram stick on the UM8000 board

I would like to know the format in putty to run against the CF card to clean the drive. I used to have it now I can not locate it. You use putty to run the script. Any help would be appreciated. Thank You

Is there a Script to run in putty to defrag then CF or clean the CF on the UM8000

Look in the system options and service class there is a bit that needs to be turned on to pass DTMF I had the same issue found it in the rel 12 program manual

Look at the numbering plan as well the internal modem for the UM8000 may match the PBX numbering plan this will stop you from adding mail boxes

The latest is on the knowledge base If you need the 9.50 or the 9.51 they are the latest that I have if needed but it will not do any LIC those will need to be ordered through nec

Need to know if there are any MIB`s ned to operate the SNMP out of the SV8500 or not. Or maybe the monitor device just looks at the alarm data any information would be help fulland if I can get an email on this thanks