Recent content by blondboy71

I am attempting to patch a 7.5 signaling server that is a part of a MGS card. It appears to have 2 previous patches installed. I am trying to remove them, and install the latest linuxbase, latest baseweb, latest patchweb, and the latest service pack. When I try to poos the old patches, they...

My primary has NRS, subscriber manager and other stuff deployed on it. The member has nothing deployed on it. If in my situation I do not need a follower, then when would the follower be needed. I just want to make sure my system is setup for redundancy as it is supposed to be. Seems like...

Yes the SS in the first cabinet is the Primary, and the SS in the second cabinet is a Member. So should the one in the second cabinet be a follower to the Primary?

I have a CS1000 setup with 2 cabinets and has been configured has Highly Available. The call server CPU's are in the Join mode, so they look to be configured properly. In looking at the signaling servers, the SS in the first cabinet is setup as "Primary", and the SS in the second cabinet is...

When I try to do a Retrieve and Reconcile for all phones, I get HTTP Status 404 - /bccWeb/src/jsp/telephone/.jsp -------------------------------------------------------------------------------- type Status report message /bccWeb/src/jsp/telephone/.jsp description The requested resource...

Both problems existed, both fixed the issue. Thanks so much!!

I have a 7.5 system with 4 MGC cards, and 1 MGS card. I installed all the latest peps, and the MGS card will not update. Here is what I get from LD 143: >ld 143 CCBR000 .upgmg stat +-------------------------------------------------+ | IPMG SOFTWARE UPGRADE STATUS |...

I am having issues with the retrieve feature to get new and updated information on the phones in my system. When I try to retrieve and reconcile all, the frame of internet explorer times out, with an apache error. I have over 1000 phones on the system. Is there an option to extend the timeout...

I have a 7.5 CS1000E system. When I try to regenerate my secure FTP token, at the top it has 12 of 13 elements updated, and I get a failed statuse on one of my call servers. In the details, it states Failed to send file...

Through the many years I have upgraded codes on Nortel Switches, I have always updated the software image first, then updated the firmware image. I have yet to brick a switch until today. We have an older 4550T that was at code level 5.0.x, so I was going to upgrade to the 5.6 code. I...

That worked. Thanks!

We had our CS1k upgraded from 5.0 to 7.5 within the last year. We have 4 BCM 450 systems with digital phones attached to the CS1K. When we were at 5.0, we were able to forward ip phones that were registered to the CS1k to a digital phone on one of the BCM systems. Since the upgrade we are not...

I downloaded the firmware 173_040.zip, but when I try to unpack the zip file it ask for a password. Does anybody know what the password is?

Can any body tell me what message is displayed when a dch goes down and also when it comes back up. I have cdr setup and have a program that if it sees a certain string of letters and numbers, it will send an e-mail.

Still does not work. The MGC card is up and registered.