Recent content by billk89

If i change a prot from half duplex to full would this cause the port to drop for a second. Not sure if i can do this during working hrs? Thx Bill

Got it Split tunnel was the trick

forget the PDM use console http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml copy and past smiple as that Good luck Bill rember as long as you do not write mem, all you have to do is reboot and u will be back to normal

Hi I switched to a new pix 515e and had to create new vpn users/groups but now the internet does not work with the VPN. VPN is working fine but know internet, any ideas Thanks Bill

What are the commands to create a user account to this group as it is right now i have users just putting in the same password to get connected to the VPN vpngroup someoffice address-pool someoffice vpngroup dns-server 19x.x.x.x vpngroup someoffice default-domain somedomain.com vpngroup...

I have 2 subnets 10.x and 1.x with a router between them I have a pix on the 1.x network that does the NATing for both the 10 and 1 networks to access the internet. I want 2 computers from the 10.x network to be able to access the 1.x computers but do not want the 1.x computers to access the...

I have pix version 6.1 on a 515 I have a bunch of the fixup protorocl in the running config Do i still needs thses on version 7.2 Also how can i allow pptp to go out on the pix I have one computer behind this pix that wants to connect to a windows vpn server in the ohter part of the city...

I have a 1.x network and 10. The 10.x is behind a 1600 rotuer and all the rules are open to access the 1.x network, but I cant access it Is there anything missing on the pix side the 1.x network that could be stopping access to the 10.x network here is the pix config PIX Version 6.1(1) nameif...

Yea it got stuck again restared the spooler and then it printted but cut it short again , Somthing on that computer anyway ill keep digging thx for the posts

You could be right the funny thing is though this machien is the fastest one we have with 2 gigs of mem, but its not to say that somthing is eating up the memory, going to have a look Thx bill

I have a new design jet , that works on all my computers expect the one. So I knows it’s something in the os’s side that could be causing issues, hooked it up to usb and still the same , we know its not network issues, also reinstalled the driver still the same. What happens is that it seems to...

pix 515 os 6.1 32m ram Can I and should i go to 6.3 Also can i jump right to 6.3 from 6.1 Thanks again Bill

router#conf t router(config)#ip access-list extended 100 router(config-ext-nacl)#no 40 router(config-ext-nacl)#40 permit ip host 192.168.10.63 192.168.1.0 0.0.0.255 router(config-ext-nacl)#end router#wr ? Also what is this telling me the no 40 line, then 40 permit ip host 192.168.10.63...

Standard IP access list 10 permit 192.168.10.0, wildcard bits 0.0.0.255 permit 192.168.1.0, wildcard bits 0.0.0.255 Extended IP access list 100 permit ip any host 192.168.1.1 (30561 matches) permit ip any host 192.168.1.199 (1 match) permit ip any 192.168.100.0 0.0.0.255...

Still didnt work, must be somthing im missing here here is the config , any one see anything i do not have there thanks again Bill version 11.2 no service finger service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname ! enable secret 5 enable...