Recent content by Bignose_2

OK, thanks Had a quick look at the manual, I will work it out but does not seem immediately obvious how to program the trunk to a key. Thanks again.

Hi, Thank you for your reply, PC Pro, Prefer to use PC Pro as much as possible but I guess need to use the MLT to program some features? How do I assign a trunk number to the keys. Is there is a manual or instructions? I could not find anything that had that sort of detail for programming...

The line keys, the top 2 lines of my 24 button mlt. The top 2, from the left, light up red when one or two lines are used. This one I would like to be able to pick up & press a spare button & get the SIP line. My 2nd MLT (SIP) I don't remember programming (but must have) lights up 2nd line...

Hi, Have SL1100 & two MLT 24 key. One came "as is" & uses the 2 ISDN lines as normal. incoming & outgoing I would like to pick up handset & press e.g. 3rd soft key & get the SIP line The first 2 I guess are OEM line trunk 1 & 2 I should say currently because there is a fault on my ISDN lines...

Hi, Been a while since I have needed help SIP trunk working well on my SL1100 however as not been programming for a few months already rusty so thought I would ask rather than trial & error. Looking to move broadband providers and the best so far does NOT have Static IP. I mean WAN IP & not...

Thanks again, I had already removed ports 80 & 443 but left the PcPro port but changed from the 8000. This allows PCPro access as long as I change the port number each time I try to connect & all OK and as far as I can tell now does not allow web pro access, "this site cannot be reached" so...

Hi, Many thanks for that information, I don't need or want programming from the internet/router, just locally but was not sure If I could do that. I can/will change the ports but could I also remove two? Anyway to have purely local? If I remove both 90-54-01 & 90-54-03 i.e. delete so blank...

Hi, Got hacked the last 2 nights & lost £91 (thankfully no more, my account top's up & stopped after 3 quick £20's, not sure why but pleased) Sipgate Trunk but don't think their fault but not 100% sure First night got email from sipgate - call blocked to high value overseas. no lost money. I...

OK, thanks So the brrrrr for the ISDN trunk must be at the providers end i.e. BT. & the continuous tone for the SIP trunk must be from the Sip trunk provider. i.e. Sipgate. I guess perhaps change the internal dial tone to something very different from the two others. Fine for ISDN trunk as...

Hi, SL1100 Is there a way to change the dial tone for a Sip trunk once pressed 9 for outside line. Is is exactly the same as the tone as when first lifted handset for internal etc. The ISDN trunk has a very different from the tone once pressed 9. more of a brrrrr I have looked at Service...

Thanks again, I am actually having to back up a little with more pressing issue, I now am concerned I am going to struggle with concurrent incoming & outgoing calls sipgate on my package has 1 trunk but specs says concurrent calls: 2 incoming/100 outgoing I now think this is a problem for the...

Thanks, could not access the file from engineering downloads Just a blank page, I do have most of the manuals, if it was one of those

Many thanks for already taking this much time on my problem. I would be happy to send my config file but really don't expect you to trawl through that. Would not know how to send securely either. If you think CID should pass through on DDI fall over & even with just 1 SIP trunk I may try some...

I think my problem is & no solution as far as I can tell. I only have 1 Sip Trunk & so can't do trunk to trunk as such, I thought it might just use another channel, hence being engaged. I have it set up so I don't use my ISDN because these are going anyway. I guess no way round, I can have 3...

HI Thanks for your help again These were already set: 20-09-02 Caller ID display = Ticked 14-02-10 ? Analogue trunk - no options, on isdn & SIP 14-01-22 Caller ID to voice mail = Ticked 14-01-24 Trunk To Trunk Caller ID through mode = Ticked I actually had the function of transferring calls...