Recent content by arunknair

1 and 2 Do I need to increase it?

i tried it after entering the number i have to press # then its working !!!! how to do it without pressing #

no djmt ...it was a typo So this is the correct SC. 9N; Dial N"@172.17.84.36 Line Group 18 let me try this

IPO is rele 8.1 I tried this 9N; Dial N"@72.17.84.36" Line Group 18 After dialing the numbers nothing is happening

IP office is Release 8.1 I have all required licenses.

Its not working, Phone is showing Call Rejected.

tried to configure ARS its not working Changed the codes and incoming issue is solved

Short code 9N Dial N Line Group 18 I am not using the ARS.

when i press 9 and dial number system says call rejected. Also i have issues with incoming call i cannot hear what the caller is saying but the caller can hear me? Is it a codec issue. i have set the codecs as the telco suggested.

---------------------------------------------------------------------------- Peer Domain Name: sip://172.17.84.36 Resolved Address: 172.17.84.36 Line Number: 17 Number of Administered Channels: 12 Number of Channels...

I have configured a SIP trunk of IPO, i have done this before so many times, this time telco is different. I am not able to make any outgoing calls, i caontacted telco and they send me the trace from their side Traces are showing that the PBX is sending the called number as IP address in tel...

Found the solution here, http://www.tek-tips.com/viewthread.cfm?qid=1664917 Issue solved, bu what could be the reason??

Managed to open the log file : 2013-06-23 22:00:35,783 [WrapperStartStopAppMain] INFO com.swhh.cscm.service.CSCMService - service cscm starting 2013-06-23 22:00:36,293 [WrapperStartStopAppMain] INFO com.swhh.cscm.database.DBMaker - correct database version found 2013-06-23 22:00:36,307...

I am facing a strange issue with the contact store, the contactstore server is showing an error no disk space in C Drive. Call are not recorded, no file is stuck in the VRL folder. I checked everything and found that the cscm log file in logs folder under witness in 120GB !! in size. I deleted...

I have configured a 30 channel sip trunk for one of my customer, but when i try to make outgoing call systems call rejeted and we figuresd out that this issue from telco. Incoming is working fine I have set the SIP tab used users with the sip live numbers , When i make a call the IPO is send...