Recent content by ANESTECH

Good day to all Me have a NS500 system working and i did some changes in digital phones and save it but i have the status led in red color, the system is working well, how i can to do for the led go to green color? Thanks

Sorry for capital letters, i don´t know it.

HOW I CAN KNOW THE COMMANDS FOR CLEAR BUFFER SOME SIMILAR TO THE PBX´S NORTEL? THANKS

ok thanks for your assistance.

ME UNDERSTAND THE NEXT HYPERTERMINAL HOST ADDRESS XX.XX.XX.XX PORT NUMBER 2300 CONNECT USING TCP/IP (Winsock) AND GIVE ENTER AND NOT GET ANSWER, NEED GIVE SOME COMMAND FOR GET ANSWER THANKS

HI TO ALL, ME INSTALL TO IP PBX NS500 BUT I NEED DOWNLOAD THE CDR OR CALLS REGISTER, ME CAN USE HYPERTERMINAL FOR DOWNLOAD IT? AND HOW I CAN GET IT OR I NEED SOME SPECIAL SOFTWARE FOR DO IT?, WHAT CONFIGURATION I NEED BUT THE NS500 ONLY HAVE ONE PORT FOR LAN THANKS

Hi to all, How i can remove next error from pbx that send me constantly form my terminal SRPT062 Request to register TN rejected. DUPLICATE tn = 108-00-05-01 hwid = 1800 1bbaf3c4 fc6602 Thanks

HI TO ALL ME HAVE A AVAYA AURA PBX WITH SERVER S8300 AND G450, I NEED MODIFY CONFIGURATION OF SOMES PHONES AND ANALOG TRUKS BUT I DON´T HAVE THE DOCUMENTATION FOR DO IT, WHERE I CAN FOUND THIS INFO FOR TO DO CHANGES, I DON´T SEE INFO FOR THIS AND THE VENDOR DON´T LET ME INFO. THANKS

I AM USING FOR MY TRUNKS DTI´S AND NO PRI´S.

HI TO ALL ME HAVE THE NEXT SCENARIO FOR TREE PBAX, TWO NORTEL AND ONE VCX CONNECT - ONE PBAX CS1KM, MAIN, OUTGOING/INGOING CALL TO PSTN - ONE PBAX CS1KE, REMOTE - ONE PBAX VCX CONN 200, REMOTE THE TREE PBAX WORK SO - PBAX CS1KM TO PSTN WITH TRUNK DID IN R2MF, TRUNK TIE TO CS1KE, TRUNK TIE...

HI TO ALL WHICH ARE THE PARAMETERS FOR BUILT A TRUNK IN MODE TRUNK TO TRUNK TOWARD OTHER TRUNK DIFFERENT TO PBX´S NORTEL, ALWAYS I HAVE CONNECTED TRUNKS BETWEEN PBX NORTEL AND NO FOR OTHER PBX AND THE TECH FORM HP SERVER TELL ME THAT I VERIFY THE MODE TRUNK TO TRUNK IN MY CS1K? HOW IS THIS...

What is the best configuration for interconnect an CS1K with DTI2 in R2MF towards others pbx no nortel (avaya, mitel, hp, asterisk, shoretel? with type tie or did? Where i can look info over this? Thanks

Hi to all, Somebody have setup a CS1KM with a Digital Gateway VCX V7122 3COM with R2? and what configuration give for route and trunk, the CS1KM give outgoing for external calls with 9. thanks

HI TO ALL SOMEBODY HAVE CONFIGURED AN E1 WITH R2 (DIGITAL TRUNK) FOR TO CONNECT A VCX CONNECT 200 WITH A CS1000 NORTEL/AVAYA? I HAD THIS LINK ACTIVE RECIENTLY BUT ONLY WORK WITH EXTENSIONS TO FOUR DIGITS IN BOTHS PBX´S, THE CS1000 GIVE OUTGOING CALL FOR PSTN DIALING 9 XXXX XXXX BUT ONLY VIEW 9...

HI TO ALL ME CONNECT A CS1000M WITH A VCX CONNECT 200 WTIH DTI CONFIGURED WITH SIGNALING R2, THE CS1000M GIVE OUTGOING CALLS FOR PSTN, WITH THIS LINK ONLY CAN DIAL EXTENSIONS (FOUR DIGITS) BETWEEN BOTH PBX´S, BUT WHEN FROM VCX CONNECT DIAL 9 XXXX XXXXX, CALLS GO TO CONSOLE OF CS1000M. ME MAKE...