Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ak714

  1. ak714

    5.0.7 cannot ping rest of network

    This issue has been resolved, turns out the setup was ok and it was on the port I was connected to, only allowed a totally different subnet. Once I move the server into the correct port, everything was fine.
  2. ak714

    5.0.7 cannot ping rest of network

    Here's the netstat -rn netstat -rn Routing tables Destination Gateway Flags Refs Use Interface default 172.16.1.1 UGS 1 0 net1 127.0.0.1 127.0.0.1 UH 2 2 lo0 172.16.1 172.16.1.22 UC...
  3. ak714

    5.0.7 cannot ping rest of network

    Here's a copy of the syslog Aug 18 12:02:45 venus syslogd: restart Aug 18 12:02:45 venus SCO OpenServer(TM) Release 5 Aug 18 12:02:45 venus Aug 18 12:02:45 venus (C) 1976-2003 Caldera International, Inc. and its suppliers. Aug 18 12:02:45 venus All rights reserved. Aug 18...
  4. ak714

    5.0.7 cannot ping rest of network

    The syslog looks good, the network connection is good, with a known working connection to the switch. I tested it with another system. Are there are processes that need to be started at bootup? I also update the drivers for the nic Intel PRO/1000.
  5. ak714

    5.0.7 cannot ping rest of network

    Here the ifconfig -a # ifconfig -a net1: flags=4043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.1.22 netmask ffffff00 broadcast 172.16.1.255 perf. params: recv size: 32768; send size: 32768; full-size frames: 1 ether 00:c0:9f:24:3f:cf lo0...
  6. ak714

    5.0.7 cannot ping rest of network

    I have rebuilt a 5.0.7 server, cannot ping the gateway (172.16.1.1) or any other device on the network. Can ping itself (172.16.1.22) and the loopback (127.1.1.1). I think i'm missing some routing but it looks ok. Do I need to start/create any daemons? Any suggestions.
See more

Part and Inventory Search

Back
Top