Recent content by 2809tst

Thanks a lot for the help. Your guys are great!!

Hi group, Need help to recover lost password for CICS- DR1.0 Expanded S/W Ver7.3. Can't find the de-bug code for this. Thanks!

Hi group, I have a BCM50 Release 3 which has been working fine since a power outage. Since then, the BCM50 just reboots on its own mind every few days. Is it a failing hard drive? or what could have caused this? Thanks for any help.

Thank you Curlycord!

Thanks for the help. Curlycord, the posted thread mentions that the cabinet needs to be Rls 2. Otherwise, it won't boot up. Is it true? Has that been confirmed? Thanks.

Hi Group, I will need to upgrade a CICS from 1.0 to 7.1. I don't mind re-programming the whole system from scratch. My question is, can I just swap the software cartridge,boot up and re-program the system from scratch? I thought I had experience upgrading one before from 1.0 to 6.1, and the...

Thanks. Also, the transfer recall timer should be turned off.

Hi Group, I have to set up a BCM50 Rls 6. Auto attendant answers all incoming calls. Callers dial extension number to reach individual. A few staffs don't want to have voicemail service. They just want their phones to keep ringing until they pick up. Otherwise, caller should hang up and call...

HI Group, I run into a wired problem. It is a MICS 6.1. It has happened to reception lots of time when she was on an intercom call with other staffs, the calls dropped. Sometimes, when she calls those extensions, she hear one ring back tone and the call stops. On the screen of the reception...

Has anyone have experience getting an Aastra 480i to work with KX-TDE100?

BCM50 Rls 3 AA picks up an incoming call, and routes the call to an extension. When no answer, can that call be overflowed to an information mailbox? I want to prevent caller leaving messages in the mailbox.

HI group, I need help setting up a hunt group in Sequential mode. I set up a hunt group (DN 461) with 2 members, for example, extension 225 and 226 in sequential mode. 225 is the first member, and 226 is the other. Incoming calls are picked up by AA, and then option 1 in CCR routes the call the...

Ebstarit, meanmofo's solution is same as mine. Did you try it anyway? What's the status now? I am just curious because I install TVM50 a lot. I might run into this as well later.

Plus, you will need 2 public IP for the TDE100. One is for the main CPU card, and the other for DSP. I have tried this. It worked fine.

You can setup a VPN router in your office, and bring one VPN router with you to the customer site. You can set up the VPN the way so that when you plug in your VPN router to the customer network, the VPN tunnel will be up automatically ( I have used Cisco 851 and setup VPN remote server for...