Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fix SCN issues after upgrading to v5+ using Sonic Wall Firewalls.

AVAYA: IPO Office FAQ

Fix SCN issues after upgrading to v5+ using Sonic Wall Firewalls.

by  hairlessupportmonkey  Posted    (Edited  )
Due to fundamental differences with the SCN in IPO v4.x to v5.x you will find your SCN might fail after the upgrade.

SSA and System Monitor will show the SCN is up and running, however calls across it will fail.

This is more than likely caused by H323 transformations.

This can be found under VoIP > Settings.

http://help.mysonicwall.com/sw/eng/705/ui2/23100/VoIP/Settings.htm

Un-tick this setting, and re-stablish the VPN, and if possible reboot one of your switches to re-initiate the SCN.

Calls should now route across the SCN as before the upgrade.

Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top