Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I get the FWD/DND to stop blinking

Panasonic TVS Series Voicemail

How do I get the FWD/DND to stop blinking

by  mrpeabody  Posted    (Edited  )
1.Go into program 990

2.Select 09

3.The LCD screen fills with a series numbers made up of 1 and/or 0. These are 16 bits of memory. They are in reverse order. You want to change Bit 4, which is the 4th from the RIGHT. The default is 1. Change it to 0. Don't forget to hit STORE.

4.You may have to reset the system for the change to take effect.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top