Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why Phaser initialization takes forever?

Phaser Initialization problem

Why Phaser initialization takes forever?

by  ari014  Posted    (Edited  )
Eternal initialization at power up 340/350/360:
----------------------------------------------
1) The printer is nearly out if ink (less than one cube in one or more colors). Fill all color bins to add pressure in feeding cubes to melting. - Run myself to this again with another 360. For some reason the printer can not tell you what's up. When I added colors, the Initializing-Warming Up text changed at 99% to Melting Ink and finally it throw out the cleaning page with lot of yellow stripes. Then I run through Cleaning and got a perfect cleaning page with all jets OK.

2) You have to feed paper in manual feeder (several, one at a time). Your machine is configured to use (recycled) paper from manual feeder instead of (letterhead) from drawer during initialization cucle. When up and running, you can change this from menu.

- This is a user selectable feature, there is no indication it is set.

BR,
Ari
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top