Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do i reboot my Octel Aria system

Booting

How do i reboot my Octel Aria system

by  KenMeans  Posted    (Edited  )
If and when you need to boot or reboot your Octel system (You should not have to reboot your system) you will go to menu 13 and sub menu 1.

Once you use this utility to shut the system down it will not boot on itÆs own you will need to enter a boot command. The system will shut down and finally get to a prompt that states enter boot command. At this point you can turn the power off to the unit. Or you can enter the letter A and the system will boot into a running state. If you power the unit off and then back on it will come up to the enter boot command prompt and you will enter A for auto boot. This means that id the power is lost and then restored it the system will boot on itÆs own to a running state.

Bottom line is if it is setting at an enter boot command just enter A and it will boot unless there is a hardware problem
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top