Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Logon to Console Port

BayStack 460/470 Configuration

Logon to Console Port

by  senk1s  Posted    (Edited  )
Requirements/ Settings:
DB9 female connector serial cable (console port is a DB-9 male, DCE)
VT100/ ANSI terminal / terminal emulator
Baud: 9600
Databits: 8
Parity: None
Stopbit: 1

Main Menu:

IP Configuration/ Setup
SNMP Configuration
System Characteristics
Switch Configuration
Console/ Comm port configuration
Display Hardware Units
Spanning Tree Configuration
TELNET/ SNMP/ Web Access Configuration
Software Download
Configuration File
Display System Log
Reset
Reset to default settings
Shutdown command
Command Line Interface
Logout


Reference: System Configuration Guide - 460, 470
http://www116.nortel.com/docs/bvdoc/baystack/doc_pdf/3.6/217105-A_01.pdf
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top