Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to reset Bay 310 switch to factory default , recover the password?

How to reset Bay switch ?

How to reset Bay 310 switch to factory default , recover the password?

by  liangyuyang  Posted    (Edited  )
If you bought a second hand Bay switch (like as Bay 310), sometimes it was be protected by password. You want to reset the password and delete all configurations, the tips is:
-------------------------------
Before you power on your Bay 310, connect your console first. When Bay 310 start, you can see the whole start process. There is a prompt line during the power on: "Press . <Enter> to enter the boot option", they you can type "." and "Enter".

Select 3 to reset it to delete the password.

When your switch restart, it will ask your password, just press "Enter" key (Becasue there is no password now).
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top