Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why do I get a JAVA Error when trying to load the PDM?

PDM

Why do I get a JAVA Error when trying to load the PDM?

by  LloydSev  Posted    (Edited  )
PDM 3.0(1)[Included in PIX 6.3(4) and older] code has a problem with the newer JAVA versions.. either you can upgrade your PDM(to PDM 3.0(3)), or you can roll back your version of JAVA

Here is a link to the version of JAVA that is supported by PDM 3.0(1) and earlier.

http://java.sun.com/products/archive/j2se/1.4.1_07/


PDM 3.0(3) which was just released will work with the version you have currently installed.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top