Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is it possible to use an caller ID equipment for MD analogue phones?

AID for analogue phones

Is it possible to use an caller ID equipment for MD analogue phones?

by  fcpli  Posted    (Edited  )
Yes, this is possible, but needs some modification:
1) For versions BC7,8,9,10 there is a patch, BC11 needs a license + a patch, in BC12 a license is needed

2) For ELU11/ELU21 boards some strapping and cutting is needed (no actve sustaining, so no source code available for
the HW any more). For ELU29 a PROM change is needed. NOTE!
ELU29/1 is NOT supported!

The functionality is controlled by ICAT parameter
just in order not to load the system in case some phone does
not have this function.

This works with internal and external lines (if they are sending the AID). The function slows down the incoming call sequence for about 1-4s, depending of how many digits we are receiving (max is 10 in this patch).
The telephone has to support DTMF.

Anybody really interested can put his Email on the forum in
order to get more information.

The functionality is not free of charge....

fcpli
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top