Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I installed gcc from Skunkware but it doesn't work?

Software Installation

I installed gcc from Skunkware but it doesn't work?

by  pcunix  Posted    (Edited  )
From http://pcunix.com/SCOFAQ/scotec2.html#gcc

(SCO OSR5 only):

You need some libraries, header files and some other things that do not get installed by default.

To install these, insert your original OS CDROM, run custom, choose Install New and install the "SCO OpenServer Linker and Application Development Libraries" - note that these are NOT part of the Development System or Enterprise choices; you don't have to expand any packages, this is right at the top level. The instructions at the Skunkware site can throw you off because they tell you to look for "Application Development Libraries and Linker", which is not what is says on the CD's.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top