Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I've added more ram, do I need to increase swap?

Kernel Tuning

I've added more ram, do I need to increase swap?

by  pcunix  Posted    (Edited  )
From http://pcunix.com/SCOFAQ/scotec2.html#moreswap :

Not necessarily. There is a detailed discussion of this at http://pcunix.com/Boot/swap.html, but the main points are:

If you have enough RAM, you don't need ANY swap.

However, if you are concerned with saving panic dump information, you WILL need sufficient dump space.

You can add swap space without resizing divisions by using the "swap" command to swap to a file; see "man swap" and :

How much swap space do I need?
http://pcunix.com/SCOFAQ/scotec6.html#swap_needed

Can I add more swap space?
http://pcunix.com/SCOFAQ/scotec6.html#swap_add
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top