Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fax Sheet for Time Change

Basic Norstar Programming

Fax Sheet for Time Change

by  jerryreeve  Posted    (Edited  )
Change Time
logon enter: (Feature* * T I M E(* * 8 4 6 3 ))
<Password> enter: 23646
There will be two button indicators active(lit). Normally
they will be the 4th buttons from the bottom.
These buttons are labled in the following manner:

Back < > Next

There are also three buttons under the display. These buttons will change in
value depending on the operation that is being carried out.

<Hour:NN> Press the NEXT button if the hour is correct.
Press the CHANGE button if the hour is not correct
<AM> Press OK if the am/pm is correct otherwise press CHANGE

<Minutes:NN> Press the NEXT button if the minutes are correct.
Press the CHANGE button if the minutes are not correct

<Year:NN> Press the NEXT button if the year is correct.
Press the CHANGE button if the year is not correct

<Month:NN> Press the NEXT button if the month is correct.
Press the CHANGE button if the month is not correct

<Day:NN> Press the NEXT button if the day is correct.
Press the CHANGE button if theday is not correct

<--End of List--> press the release button to hang-up
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top