Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I pin out the jacks at the wall for my norstar digital phones

Cabling the stations

How do I pin out the jacks at the wall for my norstar digital phones

by  dcrocker22754  Posted    (Edited  )
If you are using the old stayle jacks with the red/green for the center pins of a jack, wire your station cable using the wb/bw pair to the pins/or screw terms of the red/green. Don't worry about polarity because the Norstar phones are designed to be polarity insensative(they will work in either direction). If you are using the new style modular jacks, punch down your wb/bw pait to the wb/bw pins of the jack. That's all you have to do.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top