Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pilot and 100 range DN's?

Norstar Call Pilot 100/150

Call Pilot and 100 range DN's?

by  Dmacnumberfour  Posted    (Edited  )
This is a problem that I ran into on a recent CP install. Customer wanted 100 range DN's. When I went to build Mailboxes 110 thru 119 I would get the NAME & SPECIAL PREFIX error.This from thread799-709839. Luckly I had printed it and put in my programming notes.
Resolution:
This can be resolved by configuring the CP to be VM, once up and running, go into the browser and change it to CP Interface, change the NAME & SPECIAL PREFIX from 11 & 19 to 80 & 81, Under system Properties. You may have to change the Park Prefix or Line Pool codes and other codes to a different number.This particular install I didn't have to. All is working well.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top