Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Overhead Paging

Connecting Secondary Vendors

Overhead Paging

by  johnpoole  Posted    (Edited  )
here's the code for adding a trunk group and one trunk for paging. this would usually interface with a valcom page adapter.
Code: 
REQ: prt
TYPE: rdb
CUST 0
ROUT 22

TYPE RDB
CUST 00
ROUT 22
DES  PAGE
TKTP COT
NPID_TBL_NUM   0
PRIV NO
SAT  NO
IDEF NET
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 8222
CPP  NO
TARG 0 1 2 3 4 5 7
CLEN 1
OABS
TIMR ICF  512
     OGF  512
     EOD  13952
     DSI  34944
     NRD  10112
     DDL  70
     OOD  1
     ODT  4096
     RGV  640
     FLH  510
     GRD  896
     SFB  3
     CRD  512

     IENB  5
     TFD  60
     LEXT  100
     VGD  6
SST  3 0
NEDC ETH
FEDC ORG
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
CDR  NO
MUS  NO
MR   NO
RACD NO
MANO NO
EQAR NO
FRL  0 0
FRL  1 0
FRL  2 0
FRL  3 0


PAGE 002

FRL  4 0
FRL  5 0
FRL  6 0
FRL  7 0
OHQ  NO
OHQT 00
TDET NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART  0
SGRP 0
ARDN NO
AACR NO

note: tfd timer set to 60, that does a hard rls to the valcom. trunk type is cot. you can not add timed forced disconnect to trunk type pag
Code: 
DES  PAGE
TN   040 0 00 00
TYPE COT
CDEN 8D
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
TRK  ANLG
NCOS 1
RTMB 22 2
NITE
SIGL LOP
SUPN NO
AST  NO
IAPG 0
CLS  UNR DTN CND ECD WTA LPR APN THFD SPCD
     P10 NTC
TKID
AACR NO
31 AUG 2007

dial the acod and you hit that trunk, if you need to dial past the acod, you will have to init an allow table in 49. using ldr. loop dial repeating keeps the dtr up post answer supervision. i changed this one from a pag trunk years ago because it would hang once a week. the targ is built so any station tgar 6 has access has to overhead. that keeps courtsy phones from hitting the overhead via a miss dial.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top