; TRAC.WAS How to run a continuous 'TRAC' command
; 10th October 2008
; NOTE!
; This program will only work with a WINDOWS version of Procomm Plus.
; The " ; " denotes that the data on the program file line is ignored,
; when the script is run.
; Follow the instructions by Ticking the box's on the screen & locating your source file.
; You might need to change the "Transmit Pacing" depending on the software version!
; A higher number is needed to slow the program down for older processors.
; This program file should remain unaltered & only copies made from it for whatever
; use is required. P.S. I suggest that you make it a "READ ONLY" file. & store it on
; your P.C's HARD DRIVE.
;#include "vkeys.inc" ; You must have this file "vkeys.inc"
; ; located within the "Aspect" folder!
PROC MAIN
integer event
STRING C_FILE="C:\Program Files\Symantec\Procomm Plus\ASPECT\COM_FILE"
; Change the Aspect Drive/path if it's required!. i.e. (C:\PROGRA~1\) etc.
string s_tx_list = "0,5,10,15,20,25,50,100,200,300,400,500,600,700,800,900,2000"
string s_tx_item = "20"
STRING COMMAND
When Target 0 "OVL013 " CALL OVL013
When Target 1 "OVL428 " CALL OVL428
When Target 2 "OVL111 " CALL OVL111
When Target 3 "SCH0101 " CALL SCH0101
When Target 4 "SCH0510 " CALL OVL013
When Target 5 "SCH101" CALL SCH0101
When Target 6 "SCH0099 " CALL OVL013
When Target 7 "TFC000 " CALL OVL013
When Target 8 "NPR003 " CALL NPR003
; When Target 9 "TRA100 " CALL TRA100
fopen 0 C_FILE readwrite text
fgets 0 COMMAND
dialogbox 0 69 20 247 328 2 "Use either TRAC, TRAD etc in LD 80 or STAT, IDU etc in LD 32"
editbox 1 83 23 104 11 COMMAND
pushbutton 2 194 21 40 13 "Accept" OK DEFAULT
combobox 3 200 50 34 96 DROPDOWNLIST s_tx_list s_tx_item
text 4 2 2 237 12 "Enter 'TRAC' Command in LD 80 for Call Traces" center
text 5 16 90 200 11 "Trace a DN = TRAC (Customer, Directory Number)" left
text 6 16 100 200 11 "Trace a Trunk = TRAC (Route, Member)" left
text 7 16 110 200 11 "Trace a Digital Trunk = TRAD (Loop, Channel Number)" left
text 8 16 120 200 11 "Trace a Key (Opt 11) = TRAK (Card, Unit, Key)" left
text 9 16 130 200 11 "Trace a Key (Opt 21-81) = TRAC (L,S,C,U, Key)" left
text 10 16 140 200 11 "Trace a Unit (Opt 11) = TRAK (Card, Unit)" left
text 11 16 150 200 11 "Trace a Unit (Opt 21-81) = TRAC (L,S,C,U)" left
text 12 16 160 200 11 "Trace Attendant Loops (Opt 11) = TRAO (Card, Unit)" left
text 13 16 170 200 11 "Trace Attendant Loops (Opt 51-81) = TRAO (L,S,C,U)" left
groupbox 14 13 75 221 105 " All of the commands listed below are found in LD 80 "
groupbox 15 13 182 221 110 " All of the commands listed below are found in LD 32 "
text 16 16 200 200 11 "Stat a Card (Opt 11) = STAT (Card or Slot Number)" left
text 17 16 210 200 11 "Stat a Card (Opt 21-81) = STAT (L,S,C)" left
text 18 16 220 200 11 "Stat a TN (Opt 11) = STAT (Card, Unit)" left
text 19 16 230 200 11 "Stat a TN (Opt 21-81) = STAT (L,S,C,U)" left
text 20 16 240 200 11 "Identify a Digital TN (Opt 11) = IDU (Card, Unit)" left
text 21 16 250 200 11 "Identify a Digital TN (Opt 21-81) = IDU (L,S,C,U)" left
text 22 16 260 200 11 "Identify a IPE Card (Opt 11) = IDC (Card or Slot Number)" left
text 23 16 270 200 11 "Identify a IPE Card (Opt 21-81) = IDC (L,S,C)" left
text 24 16 280 200 11 "Identify Firmware on Taurus sets = FSUM ALL" left
text 25 76 47 120 11 "Select the systems Transmit Pacing. " right
text 26 67 59 130 11 "User a higher number on older software!." right
groupbox 27 15 296 220 28 "Notes"
text 28 23 310 206 11 "(L,S,C,U) = (Opt 21-81) Loop, Shelf, Card and Unit Number" left
enddialog
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.