Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there a way to prevent E911 misdials in Release 5.00?

Nortel E911

Is there a way to prevent E911 misdials in Release 5.00?

by  911guru  Posted    (Edited  )
YES. This is achieved through the ESA Misdial Feature added in this release.

In LD 24, each ESDN (There can be a total of 16 of them now) can be configured to deal with ESA misdials.
Code:
LD 24

REQ  prt
TYPE ESA
CUST 0 

ENTR 0 
  ESDN 911
  RLI 911 
  DDGT 911[b]
  MISDIAL_PREVENTION YES 
  MISDIAL_DELAY 2 
  ALOW_LASTDIG_REPEAT YES [/b]
DFCL 2125551111
OSDN 
VOLO_COUNT     10 
VOLO_FIRST_TN  100 0 00 07 
VOLO_CALBK_TIM 15

This is built into the base software and the patch available for Release 3.00 through 4.50 (MPLR20340) is no longer needed in this release.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top