Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Conexant chipset based modem

Connect Modem to a M1 / 1000M

Conexant chipset based modem

by  GHTROUT  Posted    (Edited  )
While I suggest the USR Performance Pro modem rather than a WinModem (assuming you must use an internal modem), I did find an Init String that resulted in a Conexant based modem that could talk to the PBX.

Start > Settings > Control Panel > Phones and Modems > then find "Extra Settings" and enter this:

AT+MS=V32B
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top