Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to disable a trunk line

Load commands

How to disable a trunk line

by  sideriver  Posted    (Edited  )

To locate a TN number for a trunk line.
LD 21
REQ> LTM
Enter Cust number
Enter until report prints

This will list the Incoming (DID) trunks & Outgoing (COT) trunks. Look for the member number of the trunk that you want to disable.

To disable a trunk line
LD 32
.DISU TN number

TO enable a trunk line
LD 32
.ENLU TN number

At the prompt - enter 4 asterisks to Logout
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top