Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Speed Up The Process Of Installing Programs &restoring Corrupt Files

Speed up your Win9x/ME machine

Speed Up The Process Of Installing Programs &restoring Corrupt Files

by  nightowl17  Posted    (Edited  )
If you insert your Win98 Disk into the CD-Rom Right click on it and go to explore , Look for a folder that says WIN98 , on the right hand side of the explore find C:/ open it and drag the Win98 folder to a empty spot on C:/ this will copy the CAB files to your hard drive Once that is done go to http://www.analogx.com/contents/download/system/banishcd.htm
and down load the small program BANNISH CD and install it after it is installed open it and reset the path of the Cab Files from CD-ROM TO C:/ when bannish CD comes up Click on Change path and a dropdown box will appear open C:/ find the WIN98folder click on it and thin click done . then put your Win98 Disk into storage you will not need it again untill you reprogram
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top