Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Too much memory causes system crashes and errors

Resource Issues

Too much memory causes system crashes and errors

by  ngagne  Posted    (Edited  )
Because of an inherent problem with the W9x OSes, you cannot run more than 320MB of RAM. Having more will cause system lockups, crashes, and resource errors.

If you are experiencing any of these symptoms and have more than 320MB of RAM, remove RAM until you have less than 320MB. This should cure the problem!

More information on how to improve the performance of your W9x system can be found at faq615-786.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top