Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avoid printing blank address info on labels (CR10)

HowTo

Avoid printing blank address info on labels (CR10)

by  randysmid  Posted    (Edited  )
In our data, we will often find blank address info, and when generating labels, we don't want these blank lines to take up space. There is a very simple solution to this:

First, create sections for each of the key elements. This will most likely include a section for "Name", another section for "AddressLine1", "AddressLine2", then a final one for "City,State,Zip". Obviously, this can be modified depending on the number of lines possible.

Finally, set the "Suppress If Blank" to True for each section (under Properties).

HTH, Randy Smith
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top